LOADING 0%

Loading RakPlus — Initializing application (LOADING 0%)

  • PP-R Multi-Layer Co-Extrusion
  • DIN 8077/8078
  • DVS 2207
  • EN ISO 15874-2
  • ISO 9001:2015

Engineering.PP-R Systems.Built to Outlast.

100% Virgin Polypropylene Random-Copolymer (PP-R Type 3) extruded to DIN 8077/8078 — fused with DVS 2207 welding parameters. Manufactured by RakPlus® Rohrsysteme UAE in Umm Al Quwain, UAE.

RakPlus horizontal green PP-R pipe in a bright white climate test chamber with icy-blue and warm amber isotherm glassmorphic spec cards above the pipe.
Continuous Temp70°C
Peak Temp100°C
Density (ISO 1183)905kg/m³
Charpy ImpactNBNo Break

PP-R Type 3

Material

100% Virgin Polypropylene Random-Copolymer

Pure polymer matrix characterised by elasticity, compression strength, and resistance to high-temperature extraction — the molecular foundation of every RakPlus pipe.

ISO 1183 · Density 905 kg/m³

DIN 8077/8078

Dimensional

Strict German Dimensional Compliance

Every RakPlus pipe line is produced in accordance with German Standard DIN 8077 (pipe dimensions) and DIN 8078 (general quality requirements) — the global benchmark for polypropylene pressure pipes.

MFR ≤ 0.3 g/10min

DVS 2207

Welding

DVS 2207 Fusion Welding Compliance

Socket fusion parameters are calibrated and stabilised at 260°C (±10°C) per DVS 2207 regulations — producing a seamless molecular bond that eliminates joint failure.

260°C ± 10°C

  • 01
    Polymer100% Polymer
  • 02
    Brass100% Brass
  • 03
    WRASWRAS approved material
  • 04
    50yr50 years guaranteed service life
RakPlus green socket pair on a bright white optical-grade ceramic inspection stage with emerald laser measurement rings and dimensional tolerance telemetry card.

DIN 8077/8078.905 kg/m³ Density.Micron Precision.

Optical-grade laser metrology verifies every extruded socket to within ±0.05 mm of the DIN 8077/8078 dimensional tolerance — paired with a Melt Flow Rate ≤ 0.3 g/10min (ISO 1133) to guarantee consistent polymer chain length and weldability batch after batch.

RakPlus all-green 90° elbow on a bright alabaster architectural pedestal with cyan fluid-dynamics flow arrows and a DVS 2207 fusion zone spec card.

DVS 2207 Fusion.Homogeneous Bond.Zero Weak Joints.

Socket fusion parameters are stabilised at 260 °C ± 10 °C per DVS 2207, producing a seamless molecular bond — verified by Charpy Impact 'No Break' results under ISO 179/1eU. Every elbow joint is engineered to outlast the buildings it serves.

PP-R Multi-Layer Co-Extrusion

Engineering the Best
PP-R Pipes in the
Multi-Layer Technology.

Utilizing 100% Virgin Material, our advanced co-extrusion process strictly adheres to German Standard engineering protocols.

100% Virgin PP-R Type 3

100% Virgin
Polypropylene
Random-Copolymer.

Our proprietary material matrix is characterized by unmatched elasticity, rigidity, tightness, and compression strength. Engineered specifically to combat the harsh Middle Eastern climate, RAKPLUS pipes deliver complete resistance to corrosion and scaling, guaranteeing pure, non-toxic potable water supply.

PN10 to PN25SDR6 to SDR1120mm to 160mm0.24 W/mK50-Year Life
DIN 8077/8078 Compliant

DIN 8077/8078 &
DVS 2207 Fusion
Compliance.

Every millimeter of a RAKPLUS pipe is extruded in strict accordance with German DIN standards. Utilizing advanced DVS 2207 welding regulations, our systems achieve a seamless molecular bond — creating an indestructible network that completely eliminates the risk of leaks in high-stress HVAC and industrial applications.

DIN 8077/8078DVS 2207EN ISO 15874-2ISO 9001:2015
ISO 9001:2015 Certified

Outlasting the
Buildings We Power.

Backed by ISO 9001:2015 certification and independent international laboratory testing, we guarantee a 50-year service life on all standard installations. Experience the pinnacle of fluid engineering.

50Year Guarantee
25Bar Max Pressure
100°CPeak Temp
5Standards

RakPlus — Direct Answers

Frequently Asked QuestionsPPR Pipes & Fittings in the UAE

Direct, fact-checked answers to the four most-asked commercial queries about RakPlus PPR pipe systems. All figures below are sourced from the RakPlus technical submittal and WRAS certification documents.

01.Why choose RakPlus PPR pipes for UAE high-temperature plumbing systems?

RakPlus PPR pipes are engineered from 100% Virgin Polypropylene Random Copolymer (PP-R Type 3) — a molecularly stable matrix that resists creep, scaling, and chlorine degradation. Every brass-insert transition fitting is machined from 100% Brass, never plated, never hybrid. The dual-purity construction preserves mechanical integrity at 95°C continuous operating temperatures and 100°C short-term peaks — the thermal envelope of high-temperature plumbing systems in the UAE. This is why specifying engineers in Dubai, Abu Dhabi, and the wider GCC select RakPlus for hotels, hospitals, and high-rise residential towers.

02.Are RakPlus PPR piping systems certified for potable drinking water?

Yes. Every RakPlus PPR pipe and brass-insert fitting is WRAS approved (Water Regulations Advisory Scheme), the international benchmark for materials in contact with potable drinking water. WRAS approval is independently tested and certified, and is the standard required by consultants and municipalities across the UAE, Saudi Arabia, Qatar, Kuwait, Bahrain, and Oman. The certification applies to the complete RakPlus PP-R system — pipes, fittings, and brass-insert transitions.

03.What is the certified operating lifespan of RakPlus systems?

Every RakPlus PPR system carries a 50-year manufacturer service life guarantee. The 50-year warranty is the longest published guarantee offered by any PPR pipe manufacturer in the UAE, and is written into every RakPlus commercial quotation. The certified 50-year service life is a direct consequence of the 100% Polymer pipe matrix, 100% Brass insert fittings, and WRAS approved material specification, manufactured to German Standard DIN 8077/8078 and welded to DVS 2207.

04.What temperature and pressure ratings do RakPlus PPR pipes handle?

RakPlus PPR pipes are available in four pressure classes — PN10 (SDR 11), PN16 (SDR 7.4), PN20 (SDR 6), and PN25 (SDR 5) — covering the full range of UAE plumbing requirements from residential cold-water distribution to industrial high-pressure risers. Operating temperature ratings are 70°C continuous with 100°C short-term peaks across all classes, with PN20 and PN25 rated for up to 95°C in hot-water recirculation systems. Pipe diameters are stocked from 20 mm to 160 mm. All pressure and temperature figures are published in the RakPlus technical datasheet and are available on request.

PPR & Plumbing Technical Terms — Defined

Authoritative definitions of the four most-cited benchmarks used in PPR pipe specification across the UAE and GCC.

WRAS
Water Regulations Advisory Scheme — UK certification confirming plumbing materials are safe for contact with potable drinking water. RakPlus PPR pipes and brass-insert fittings carry WRAS approval, the international benchmark demanded by consultants and municipalities across the UAE and GCC.
SDR
Standard Dimension Ratio — outer diameter divided by wall thickness. A lower SDR means a thicker wall and a higher pressure rating. RakPlus PPR pipes are manufactured in SDR 11 (PN10), SDR 7.4 (PN16), SDR 6 (PN20), and SDR 5 (PN25).
PN20
Pressure class rating for a pipe that withstands a continuous operating pressure of 20 bar at 20°C. RakPlus PN20 PPR pipes have an SDR of 6 and are the most common specification for hot-water recirculation loops and high-rise residential risers across the GCC. 70°C continuous, 100°C short-term peak.
DIN 8077/8078
German Standard dimensional and quality specifications for polypropylene (PP-R) pressure pipes. RakPlus PPR pipes are manufactured in strict accordance with DIN 8077 (pipe dimensions) and DIN 8078 (general quality), welded to DVS 2207 — the European and Gulf consulting-engineer standard.

// Signature Feature 01 — RakPlus Catalogue p.22

Thermal Expansion & Bending Arm Calculator.

Engineers compute the exact thermal expansion ΔL and required free bending arm length Ls for any RakPlus PP-R pipe run — powered by the formulae on page 22 of the official catalogue (RakPlus® Rohrsysteme UAE, UAE).

Input Parameters

8 m

Catalogue p.22: 1 m – 50 m

16 °C

Ambient temperature at the moment of jointing

70 °C

Maximum operating temperature (Catalogue p.04: 0-70 °C continuous, 100 °C peak)

32 mm

FORMULA · ΔL = λ × L × ΔT

FORMULA · Ls = K × √(d × |ΔL|)

λ = 0.183 mm/(m·K) K = 30

Live Schematic · ΔL & Bending Arm Ls

L = 8 mLs=1509mmΔL+79.1 mmEXPANSIONd = 32 mm

ΔL · Linear Expansion

+79.1mm

EXPANSION

Ls · Bending Arm

1509mm

FREE LENGTH REQUIRED

ΔT · Temp Differential

+54K

16°C → 70°C

Catalogue Worked Example

MATCHΔL₂

ΔL₂ = 79.0 mm (p.22)

Source: RakPlus Catalogue, RakPlus® Rohrsysteme UAE, p.22 · λ = 0.183 mm/(m·K) · K = 30 (PP-R pipes)

RakPlus UAE — Verified Specifications

Innovative High-Pressure Water Systems — German Engineered

RakPlus high-pressure water systems are engineered to German Standard DIN 8077/8078, optimized for the UAE climate, and manufactured from 100% Polymer with 100% Brass commercial pipe fittings. Industrial plumbing solutions backed by a 50-year guaranteed service life.

Catalogue p.03 — Verified Applications

  • 01

    Potable Hot & Cold Water

    WRAS approved material for residential, commercial, and high-rise risers — the primary RakPlus application across the UAE and GCC.

    DIN 8077/8078 · WRAS

  • 02

    HVAC & Compressed Air

    Chemically inert PP-R matrix for chilled water, condenser, and low-pressure compressed air distribution in mechanical rooms.

    EN ISO 15874-2

  • 03

    Rainwater Utilization

    UV-stabilised green and yellow pipe variants for non-potable rainwater harvesting, stormwater reuse, and greywater recycling networks.

    DVS 2207 Welding

  • 04

    Agricultural & Irrigation

    Corrosion-resistant networks for drip-feed irrigation, hydroponic loops, and greenhouse water distribution across arid-climate projects.

    DIN 8078 Quality

  • 05

    Swimming Pool & Spa

    Chlorine-resistant 100% polymer matrix for pool balancing tanks, spa return lines, and chlorine dosing systems.

    Chemical Resistance Verified

  • 06

    Corrosive Industrial Fluids

    Chemically inert to acids, alkalis, and desalination brine — engineered for industrial process water, RO reject, and chemical dosing.

    Catalogue p.24 Chemical Chart

DIN / ISO / DVS Compliance Cluster

  • DIN 8077PP-R Pipe Dimensions
  • DIN 8078PP-R General Quality
  • DVS 2207Fusion Welding Parameters
  • EN ISO 15874-2PP-R Piping System Standard
  • ISO 9001:2015Quality Management
  • ISO 14001:2015Environmental Management
  • WRASPotable Water Approval
  • 50 yrService Life Guarantee